A hydraulic hammer is a tool to break up thick clay or rock-filled soil. This machinery is so powerful that it can even break through rocks and be used for demolition projects. It differs from the typical hammer and is usually fitted to an excavator to remove rigid structures.

In recent years, there has been relentless technological development in hydraulic breakers.  These advancements have ensured that there is less operating cost, a boost in breaking efficiency, proper operation, and the time for completing tasks has been dramatically reduced. For this reason, fleet owners have achieved cost efficiency and long-term productivity.

Here, you will find some of the latest advancements in technology that have been made to hydraulic hammers and their effect on projects.

Recent Advancements in Hydraulic Hammer Technology

Modern times they have introduced hydraulic hammer technology designed to support and boost equipment fleets. Although this technology is not going anywhere, there have been specific changes for the better to help equipment operators. This upgrade does the job better and has been portraying praise-worthy benefits like bringing efficiency to a whole new level, to mention a few. 

Improved Power

One significant technological advancement of the hydraulic hammer can be found in the energy-recovery valve. This is designed to enhance the striking power of the hammer. It works by channeling recoil energy to the tool’s next blow. With this significant addition, operators can dig into any soil or rock, no matter how hard or solid it may seem. All it takes is a major blow from the hydraulic hammer.

Increased Efficiency

Another technological improvement that has come forth is speed control. The function of the speed control is that it adapts the hammer’s speed and power to the material being broken. Its ability to do this offers increased productivity. Also, it lessens the backflow of harmful energy that may be directed toward the excavator. This feature manifests in the hydraulic hammer to multiply the piston speed without reducing the power.

Reduced Noise

Demolition projects take place in both urban and rural sites. Some places here are usually noise-sensitive areas, which has been considered with the latest advancements of hydraulic hammers you will find in the field today.   In a quest for a quieter breaker, most manufacturers exclusively use a boxed/silenced design rather than a side plated/open faced breaker.   The boxed or silenced hydraulic breakers use several features to muffle the noise.  Many use a a tri-suspension system with a suspension jacket and upper and lower buffers. While the suspension jacket connects the power cell for smooth and convenient performance, the lower and upper buffers muffle sound and reduce recoil that would usually travel through the hammer to the carrier and its operator.  These new developments result in reliable, smoother operation as well as providing significantly reduced noise and environmental impact.  As noise regulations become more common-especially in urban areas-the boxed/silenced design will likely be required.  

Improved Durability

Recent hydraulic hammer technology includes blank-firing protection. This is designed to reduce the wear and tear that usually happens to the hammer when the demolition tool cycles out but is not on the material.  It is also known as dry firing or “firing in the air”.   The availability of the blank-firing security guards against demolition tool to tool retainer metal-to-metal contact, which is the usual cause of premature tool and retainer wear.  Although no anti-blank fire mechanism is foolproof and they can slow down production, t his newer technology can provide protection for the hammer in the hands of a bad operator or on a site where there is just no way to avoid blank firing.  

Conclusion

Getting the right equipment is paramount to completing the job on time with little stress. At Gorilla Hammers, we are capable of helping you achieve this. You can come to us if you wish to get and experience the beauty of the latest advancement in hydraulic hammer technology. To get started, give us a call at 1 (888) 814 – 6745 or fill out a contact form on our website.