SPECIALS


$ave BIG now 

on our used hammer selection

and good used hammer components!! 


Our available hammers have either been traded or consigned to Gorilla. They are all working units and will be sold as is, there is no warranty.

We also offer good used hammer components which are original (OEM) quality, thoroughly inspected, MAGNAFLUX tested and have all allowable tolerances measured for reuse as per the OEM, there is no warranty.

For an additional cost, the hammers will be processed through the Gorilla factory authorized service center. The rebuilding process includes complete tear down and inspection of hammer’s worn components and magnaflux testing of the lower chuck housing piston and tie rods. After assembly of the power cell a cycle test will be performed. Upon a satisfactory result, the hammer will then be completely assembled and a second pound test will be conducted. In addition, installation and flow test of carrier is available depending on buyer’s location.

An estimate for available services can be given with each hammer.


 

                                        

                    #901-NPK 4k             #902-BTI TB625QA      #903-Allied 795CS      #904-BTI TB425X

                        $10,700.00                                                              $24,700.00                                            $13,000.00                                                            $6,500.00

       Ft lbs:1,000 | Working Weight: 1,100                     Ft lbs: 1,500| Working Weight: 1,300          Ft lbs: 9,000 | Working Weight: 7,200          Ft lbs: 1,100| Working Weight: 750

         Oil Flow: 17-22  gpm| PSI: 2,200                              Oil Flow: 18-26 gpm| PSI: 2,320                     Oil Flow: 64-79 gpm| PSI: 2,600                   Oil Flow: 12-21gpm |PSI: 2,320

              Carrier Weight: 17-22 tons                                      Carrier Weight: 6.75- 13 tons                            Carrier Weight: 34-50 tons                                Carrier Weight: 5.5-11 tons

                                         

#905-Kent KHB 30G  #906-Okada TOP300  #907-Allied 775 MCS #908-Tramac BRV-32

                   $25,350.00                                                              $12,935.00                                            $22,100.00                                                 $22,035.00

    Ft lbs: 6,000 | Working Weight: 5,328                 Ft lbs: 7,500 | Working Weight: 6,450              Ft lbs: 4,000 | Working Weight: 3,700         Ft lbs: 5,000| Working Weight: 3,320

        Oil Flow: 32-45 gpm| PSI: 1,950                              Oil Flow: 63-72 gpm| PSI: 2,030                        Oil Flow: 34-42 gpm| PSI: 2,600                  Oil Flow: 32-45 gpm| PSI: 1,950

         Carrier Weight: 28.5-35 tons                                       Carrier Weight: 31-47 tons                                       Carrier Weight: 22-38 tons                          Carrier Weight: 20-40 tons

 

 

                      

#909-BTI TB830XC     #910-CAT H120            #911-Tramac 501               #912-NPK GH-12

         $32,500.00                                     $22,100.00                                                  $6,500.00                                                     $25,350.00

Ft lbs: 3,000 | Working Weight: 2,640      Ft lbs: 3,000| Working Weight: 2,870        Ft lbs: 2,000| Working Weight: 2,180              Ft lbs: 5,500| Working Weight: 5,650

Oil Flow: 26-37 gpm| PSI: 2,540                Oil Flow:26-45 gpm| PSI: 2,031              Oil Flow: 27.5- 34.5 gpm| PSI: 1,370            Oil Flow: 55-67 gpm| PSI: 2030-2755

Carrier Weight: 11.8-27.2 tons                    Carrier Weight: 18.7-28.6 tons                          Carrier Weight: 13-26 tons                              Carrier Weight: 28-40 tons

 

                                                              

 #913 BTI TB425QA            #914 NPK E213                #915-Indeco HP3000      #916-Kent 10G

            $12,350.00                                               $16,250.00                                                    $16,670.00                                    $11,960.00

 Ft lbs: 1,100 | Working Weight: 820             Ft lbs: 4,000 | Working Weight: 4,200            Ft lbs: 3,000 | Working Weight: 2,640     Ft lbs: 2,000 | Working Weight: 1,052

   Oil Flow: 12-21 gpm | PSI: 2,320                   Oil Flow: 44-55 gpm | PSI: 2,550                   Oil Flow:29-38 gpm | PSI:1,700-1,850       Oil Flow: 26-35 gpm | PSI: 2,560

   Carrier Weight: 5.5-11 tons                                 Carrier Weight: 22.5-32.5 tons                           Carrier Weight: 16-25 tons                           Carrier Weight: 10-15.5 tons

 

             

# 917-Tramac BRP100   #918-UB318            #919-Allied  AR110B             #920-MKB 500N

          $11,000.00                                     $11,000.00                                           $26,000.00                                             $10,206.00

Ft lbs: 1,250 | Working Weight: 605     Ft lbs: 7,500 | Working Weight: 8,930        Ft lbs: 2,000 | Working Weight: 2,600       Ft lbs: 1,200 | Working Weight: 882

Oil Flow: 11.9-24.1 gpm | PSI: 1,030   Oil Flow: 63.36-87.12 gpm | PSI: 2,275-2,773 Oil Flow: 21-26 gpm | PSI: 1,740-2,030       Oil Flow:11-22.5 gpm | PSI: 1,840-2,1

    Carrier Weight: 6-13 tons                          Carrier Weight: 35-55 tons                          Carrier Weight:  13-20 tons                      Carrier Weight: 5.9-10.9 tons

 

                     

#921-Indeco MES 3500             #922-NPK E-210                 #923-Maverick HSP          #924-Kent KF12           

     $18,000.00                         $22,000.00                         $9,500.00                    $9,500.00

Ft lbs: 5,000 | Working Weight: 4,220           Ft lbs: 3,000 | Working Weight: 3,450                  Ft lbs:1,000 | Working Weight: 882        Ft lbs: 2,000| Working Weight: 2,032

Oil Flow: 37-50 gpm | PSI: 1,900-2,100                Oil Flow: 40-53 | PSI: 2,650                        Oil Flow: 8-16 gpm| PSI: 500-1,000              Oil Flow: 26-35| PSI: 2,560

     Carrier Weight: 21-40 tons                              Carrier Weight: 17.5-27.5 tons                           Carrier Weight:  5-7 tons                         Carrier Weight: 10-15.5 tons

                              

#925-Kent KHB86      #926-MKB 1700V2            #927-GHB 135                  #928-Kent 30G

      $8,500.00                     $28,102.00                      $19,500.00                          $21,500.00

Ft lbs: 1,120 | Working Weight: 775           Ft lbs: 5,000 | Working Weight: 3,969                 Ft lbs: 5,000| Working Weight: 3,560           Ft lbs:6,000 | Working Weight: 5,328

Oil flow: 17-30 gpm | PSI: 2,150                 Oil Flow: 36-48 gpm | PSI: 2,130-2,570            Oil Flow: 33-40 gpm | PSI: 2,320-2,610              Oil Flow: 48-58 | PSI: 2,320-2,610

      Carrier Weight: 7-10 tons                          Carrier Weight:19-27 tons                                 Carrier Weight: 18-25 tons                              Carrier Weight: 28.5-35 tons

 

#929-Tramac BRH 400

     $ 10,500.00

Ft lbs: 2,000| Working Weight: 1,887

   Oil Flow: 21-38 gpm| PSI: 2,150

       Carrier Weight: 7.5-18 tons

 

 

      

                                WE HAVE TOO MANY HAMMER DEALS TO LIST!

PLEASE CALL FOR MORE DETAILS!

 

* Pricing and availability are subject to change *

 The hammers advertised are being sold as is, where is with no warranty, expressed written or implied. Gorilla will not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or reinbursement will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. The seller shall and will make every reasonable effort to disclose any known defects associated with this hammer at the buyers request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the hammer.